Fiddled about finding a place for a mounting bracket for the gps, got underneath with the grease gun and gave everything a good dose of healthy clean new grease. I need to cut out a bit of the bullbar plate to allow easier access to the locking hub on my winch, so might do that this avo, also want to pull the wire off, lubricate the spool and feed the wire back on...plus it's getting close to beer o'clock
GOOD thread yumpet!!
1991 GQ TD42 Safari, 5spd, 5" Lift, 37" shovels, Locked front & rear by ARB. UFI TD05 18G & modified inlet manifold, DC pump, Cross Country intercooler, Custom 4" snorkel and airbox.