Patrol 4x4 - Nissan Patrol Forum banner

Reaction score
32,823

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews Media Albums Showcase items About

  • · Registered
    Joined
    ·
    0 Posts
    Hey mate, My mate Murray swears if you dont know it when it comes to oatrols its not worth knowing, anyhow I digress. I want to know if an untuned safari chip by dtronic will work in a crd or di.
    Cheers
    Simon

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    Hi Simon, very flattering. Yes they will work, had a chip in mine before I did a remap years ago. Remap is a better option, DI is a little more difficult for a tuner to get right, many dropped out of DI remaps. CRD is easier to get spot on and many more tuners do them.

    · Registered
    Joined
    ·
    2 Posts
    Hi Geeyoutoo, I need to know whether the oil dip stick of SD 33 non turbo and turbo are same in length?
    and what the exact dimensions are. my stick is broken need to do a fix. appreciate your support.

    Tks, Mahesh

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    I saw your thread on this subject, I'm not familiar with the SD33 engine so cannot answer with any certainty, try contacting @james008 via PM he may know.
    Ross

    · Registered
    Joined
    ·
    17 Posts
    Hi Geeyoytoo,
    i have a 2008 Patrol ST and Im in the process of installing a brake controller and if possible,OEM Cruise Control.
    This vehicle has 2 switches on the brake pedal and 1 switch on the clutch pedal. Is sourcing a Cruise control Kit from a wagon going to make the task easier?

    I attempted to access the Archive files and got the OOps message.

    Your assistance will be greatly appreciated.

    Regards

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    Yes it will, the wiring harness's for the GU are the same across the range it is just that some aren't used that is why you will find spare connections all over the place.
    Archives are fine, it may have been a forum software glitch, this happens from time to time, try again and let me know.
    Ross

    · Registered
    Joined
    ·
    0 Posts
    Mate where do I find a link to replacing the head on a zd30di? Do I have to remove the entire front engine cover?

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    Yes you do, go to my build thread and I wrote up when I did mine, complicated.

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    BTW, go to the DI archives post #9 and download the manual supp 15, in the DI section of the manual print out the EM section and all detail is in that.
    Ross

    · Registered
    2003 Nissan patrol zd30 di
    Joined
    ·
    1 Posts
    Hi I put a new head on my zd30 di, the c ccs are lined up and the a aa and b bbs are lined up put new chain on but only turns over like a quarter turn by hand then something hits. Feels like piston hitting valves

    · Registered
    Joined
    ·
    0 Posts
    Hi, I have 2010 zd30 patrol, 220km mileage, last month i checked oil pressure from passenger side oil pressure switch and on hot idle it was 12 psi, should i be worried? can it be different pressure on other switch?

    · Registered
    nissan gq patrol
    Joined
    ·
    27 Posts
    Afternoon

    I finally got around to getting another patrol and I was trying to pop some ads up in the for sale area and enquire on some items and it says I don’t have permission to do it?
    Is there something I need to do on my behalf or is this something you look into?

    cheers

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    That is weird, we put in place rules a while back against spammers that required 10 posts and a certain amount of time before a classified could be placed. Roughly how long since your last post?
    Try again and see what happens and let me know, I'll take a deep dive then.
    Ross

    · Registered
    Joined
    ·
    0 Posts
    G'day,
    Please can you point me in the right direction? I have a simple mod that I'd like to share, but I think I have to introduce myself somewhere, and I'm not sure where to put either post. I've found so much useful info on this forum over the years, and now that I've finally remembered to take photos when I do something, I need help.
    Cheers.

    · Registered
    Joined
    ·
    0 Posts
    Hey Geeyoutoo!

    LOVE THE WORK THAT YOU DO.

    I am working on a 2022 Y62 and having some electrical issues.

    Would you happen to have the ESM or PDF for the wiring diagrams?

    I have most of the stuff from pre 2015 but notice there are changes especially to the later models.

    · Registered
    Joined
    ·
    0 Posts
    Hey Geyoutoo, I am looking at buying a 2000 GU II, It just had a reconditioned motor 30,000kms ago, I am concerned as to how long it will live, researching about the zd30di. Do you think with proper maintenance and services it will last a long time? I also read that adding 2.5 inch to 3 inch exhaust as well as blocking EGR on the nissan patrol reference document can lead to these engines grenading, is that the case?

    · Registered
    Joined
    ·
    4 Posts
    Hi, I've serached quite a bit but can't find anything clear on removing a ZD30 fom a '06GU Patrol.
    Appreciate if you could point me to a link. I'm stuck on getting past the engine mount bolts. Everything else is removed. (what a mission so far)
    Cheers
    Steve
    p.s. as soon as I find time to scratch myself, I'll take and post a pic of my '89 Mav. :cool:

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    Download the workshop manual from post #9 of the DI archives.

    · Registered
    nissan
    Joined
    ·
    192 Posts
    Hi just a thought if still thinking about a 3d printer a sv06 might be worth a look.or if you designed something I’m sure you would easily find a member to print it for you.warning it is addictive.thingiverse is worth a look I’ve used parts from different models to make something completely different

    · Registered
    Patrol TB48 Ti
    Joined
    ·
    0 Posts
    Hi, My name is Kevin. Could I please have the link to download the Y62 electronic workshop manual. Thanks in advance.

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    Hi Kevin, yes, I have sent you the link in a PM. It is not easy to negotiate, that is the reason I took it down from general viewing as I was getting complaints.
    Ross

    · Registered
    Nissan Patrol GU4 2006 with Cummins ISDE4.5 270HP , 830 NM Engine Conversion
    Joined
    ·
    2,415 Posts
    Hi Ross, can you help to remove those drone photos for the Fraser Island trip? I am just told by some people that drone is not allowed in any qld national park. thanks mate.

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    Oh! Yes I'll have a look.

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    I had a look and read the rules on drones and fraser, as long as you had permission from the people, and I only saw members vehicles, there should be no issue. I like the pics, so have another think about it and get back to me, but I think they are fine.
    Ross

    · Registered
    Joined
    ·
    671 Posts
    Hey Geeyoutoo. It’s been quite a while since I’ve been on here. I don’t own a Patrol anymore, have moved on from the subject material of the Forum and it’s not really relevant to where I’m at in my life now. Could you please delete my account ?
    Thanking you in advance.
    “Wobbles”.

    · Registered
    Joined
    ·
    5 Posts
    Hi geeyoutoo, I am not aware of the protocol for joining a discussion, please accept my apologies.

    · Registered
    Joined
    ·
    5 Posts
    HI there I'm in need of some help iv got a 99 tb45 patrol and the plug from the wiring harness to the fuel sender has be cut off iv got another sender to put in and need to no the colour for the wires and where each one goes so I can hard wire the new sender in and I can't find a picture anywhere of the plug on so I can trace the wire to find out with one goes where cheers

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    You could download the manual from the link in my signature, but it might be quicker to ask the question in the GU Y61 section, we have a few 4.5 owners who would be more familiar with the 4.5 than myself.
    Ross

    · Registered
    Joined
    ·
    4 Posts
    Not sure how to send personal messages

    · PROUD AUSTRALIAN
    Y2KGUII ZD Wgn
    Joined
    ·
    62,164 Posts
    OK, click on my avatar, a panel will come up and you will see a line called start conversation, click on that and you will be messaging me directly
    Ross
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top