Hi, i have been told your the guy to talk to. im currentlyin the process of dropping a 454 into a short wheel base and was wondering if there were any problems you've run into and how you got around them. i have a bell housing and the engine crossmember has been tacked in place, just waiting for clutch set up toturn up to see if spacing is correct. engine did have single point injection but threw that manifold away and got a edlebrok inlet manifold and 750 carb. i think the main problem im goin to have is the exhaust running down the drivers side of gearbox because of the drive shaft when off roading. so any info or tips that will make it easier would be greatly appriciated. cheers