Keep blowing engine fuse - Patrol 4x4 - Nissan Patrol Forum
Patrol 4x4 - Nissan Patrol Forum, Photos, Directory

 


Go Back   Patrol 4x4 - Nissan Patrol Forum > Nissan Patrol and Safari Models > Nissan Patrol GQ/Y60 & Ford Maverick

Patrol4x4.com is the premier Nissan Patrol Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-01-2012, 09:44 AM
adam69's Avatar
Senior Member
 
Join Date: Jan 2010
Location: Romsey(happy) Vic.
Posts: 276
Thanks: 1
Thanked 0 Times in 0 Posts
Default Keep blowing engine fuse

Well here i am driving along about 10 klms from home when it just dies.Discover the eng fuse is gone(blown)Swap it for another and it blows as soon as i turn on the ignition.
I back tracked what i had done to the car recently and all i have done was fit drawers in the back the day before.
Any ideas?
__________________
Gold Patrol member #55
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 01-01-2012, 10:00 AM
Mavtroll's Avatar
Senior Member
 
Join Date: Jan 2011
Location: Goulburn NSW
Posts: 2,513
Thanks: 6
Thanked 17 Times in 15 Posts
Garage
Send a message via MSN to Mavtroll
Default

Something has worn through - the only system you can discount is the starter - trace wires - its a c"@t if a job
__________________
Back from the dead
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #3  
Old 01-01-2012, 10:31 AM
GQ TANK's Avatar
Senior Member
 
Join Date: Feb 2009
Location: Western Melbourne
Posts: 2,648
Thanks: 3
Thanked 55 Times in 50 Posts
Garage
Default

Disconnect the battery, - this will ensure that you dont blow the meter.

Put a multi meter between the positive battery terminal and ground and set it to Ohm's or short buzzer.

You will see a very low impedancer ie 0 ohms = short.

Start disconnecting wires until the short dis-appears

Also check all the screws that you put in you may have hit a cable.
__________________
91 4.2 Carbi TI GQ

3" lift, Rear Poly airbagss, 32 Mud Claws, LSD front & back
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #4  
Old 01-01-2012, 10:49 AM
adam69's Avatar
Senior Member
 
Join Date: Jan 2010
Location: Romsey(happy) Vic.
Posts: 276
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Drawers are not screwed in(its a tight fit)
I removed the four tie down points from the rear floor and refitted the screws to fill the holes.Maybe something happened there?
I have zip ability when it comes to elec work so im going to have to get an auto elec on site.
Its going to be hot for the next couple of days and i cant move it undercover so when it cools down i will sus it out to the best of my ability.
__________________
Gold Patrol member #55
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On







Subscribe in NewsGator Online


All times are GMT +10. The time now is 10:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.