DIY rockslider kits...save $$$$ - Patrol 4x4 - Nissan Patrol Forum
Patrol 4x4 - Nissan Patrol Forum, Photos, Directory

 


Go Back   Patrol 4x4 - Nissan Patrol Forum > Vendor Forums > Bolsy's Custom Sheetmetal, Trailers and Fabrications

Patrol4x4.com is the premier Nissan Patrol Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-03-2014, 06:49 AM
80lsy gq's Avatar
Senior Member

 
Join Date: Aug 2004
Location: Kensington Grove
Posts: 551
Thanks: 0
Thanked 28 Times in 18 Posts
Default DIY rockslider kits...save $$$$

looking for a cheap way to get some rocksliders. I am now offering DIY kits to suit the following vehicles. GQ Patrol all models, GU Patrol all models, 80 Landcruiser all models, Nissan Navara D22. all kits come with full bolt kit and everything you need, just weld them up, paint them and your ready to go wheeling.5mm skid plate for underside or 2.1mm steel checkerplate for the top is an additional $50 and comes cut to size. Freight is available Australia wide. Price for kits is $300 and freight is cheaper than a normal set of rocksliders as packaging is smaller

Dave
Attached Images
File Type: jpg 1016875_673156589417312_189014396_n.jpg (12.7 KB, 2142 views)
File Type: jpg 1901325_673156736083964_148915177_n.jpg (13.8 KB, 2114 views)
__________________
Rock Sliders, Rear Bars, Front bars..hell any sort of fab work..i can do it
https://www.patrol4x4.com/forum/showthread.php?t=4758

pm or email [email protected] website www.bolsys.com.au
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
The Following 2 Users Say Thank You to 80lsy gq For This Useful Post:
Pedrick (04-11-2014), Sherro1 (13-08-2014)
Sponsored Links
Advertisement
 
  #2  
Old 12-03-2014, 04:52 PM
GASSED GU's Avatar
Anger management pi$$es me off
 
Join Date: Oct 2010
Location: perth
Posts: 7,534
Thanks: 776
Thanked 1,360 Times in 891 Posts
Default

Good idea mate
__________________
Duramax patrol

Now supplying perth's own conversion one stop shop.
[email protected]


Im a horsepower whore
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #3  
Old 16-03-2014, 10:57 PM
CrazyTrolling's Avatar
Senior Member
 
Join Date: May 2009
Location: Balga by the beach
Posts: 1,472
Thanks: 46
Thanked 132 Times in 101 Posts
Send a message via MSN to CrazyTrolling
Default

should sell well
__________________
Tb48DE's eating up ZD30's and s h i t t i n g out TD42's since 2001
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
 
  #4  
Old 07-04-2014, 11:14 PM
mad possum's Avatar
Senior Member
 
Join Date: Dec 2013
Location: Hervey Bay
Posts: 550
Thanks: 26
Thanked 155 Times in 116 Posts
Default

does it come with template/instructions?
__________________
2012 CRD Simpson ed.
Sold: 4.8 GU

My CRD build thread. https://www.patrol4x4.com/forum/membe...t-mods-359225/
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #5  
Old 07-04-2014, 11:30 PM
Gasburner's Avatar
GHMBC #3
 
Join Date: Jun 2012
Location: Clontarf, Qld
Posts: 3,770
Thanks: 788
Thanked 976 Times in 734 Posts
Default

they are easy to work out.mine fitted perfect.weld stand off tube to the chassis clamp brackets,slide on and work the slider angle out to suit and set front bracket
__________________
forget turbo's - Boost is meant to be immediate
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #6  
Old 08-04-2014, 09:41 AM
Squalo's Avatar
LED ZEPPELIN
 
Join Date: May 2010
Location: Sunshine Coast QLD AUS
Posts: 12,280
Thanks: 1,876
Thanked 2,544 Times in 1,639 Posts
Garage
Default

Makes investing in a mig an even easier decision, good stuff Dave!
__________________
1995 GQ DX TD42 NA

It seems I need more endothelial cells in my blood-brain barrier
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #7  
Old 11-04-2014, 04:24 AM
80lsy gq's Avatar
Senior Member

 
Join Date: Aug 2004
Location: Kensington Grove
Posts: 551
Thanks: 0
Thanked 28 Times in 18 Posts
Default

Quote:
Originally Posted by mad possum View Post
does it come with template/instructions?
can send them marked out if needed or instructions but as stated they are very easy to set up on the vehicle and tack together. you can set them to any angle you want then

dave
__________________
Rock Sliders, Rear Bars, Front bars..hell any sort of fab work..i can do it
https://www.patrol4x4.com/forum/showthread.php?t=4758

pm or email [email protected] website www.bolsys.com.au
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #8  
Old 30-04-2014, 10:04 PM
Senior Member
 
Join Date: Jun 2011
Location: Thornlie, WA
Posts: 104
Thanks: 4
Thanked 1 Time in 1 Post
Default

Hi,

What would postage cost to 6108 Perth WA?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #9  
Old 30-04-2014, 10:18 PM
dronus4x4's Avatar
Currently in PAD rehab
 
Join Date: Apr 2010
Posts: 18,641
Thanks: 2,850
Thanked 3,871 Times in 3,110 Posts
Garage
Default

Great idea!



__________________
Arduino Consult / Voltage Modifier / Glow Plug Timer / Performance Chip / Limp Defeater Project HERE

Codename ZedDee!

Last edited by dronus4x4; 01-05-2014 at 06:57 AM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #10  
Old 01-05-2014, 03:53 AM
80lsy gq's Avatar
Senior Member

 
Join Date: Aug 2004
Location: Kensington Grove
Posts: 551
Thanks: 0
Thanked 28 Times in 18 Posts
Default

Quote:
Originally Posted by guyph_01 View Post
Hi,

What would postage cost to 6108 Perth WA?
approx. $55

Dave
__________________
Rock Sliders, Rear Bars, Front bars..hell any sort of fab work..i can do it
https://www.patrol4x4.com/forum/showthread.php?t=4758

pm or email [email protected] website www.bolsys.com.au
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #11  
Old 12-05-2014, 08:14 AM
Senior Member
 
Join Date: Jun 2011
Location: Thornlie, WA
Posts: 104
Thanks: 4
Thanked 1 Time in 1 Post
Default

Cool this sounds interesting, So does it comes with the bolt holes drilled already? with bolts? Or is it cheaper without the above?
Are they the 1 3/4 inch seamless tube, and you said you can send them marked out?

Out of interest, do you do scrub bars too? what would and pair cost posted here?
All for a LWB GQ, 2", no body lift.

Thx
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #12  
Old 13-05-2014, 05:39 AM
80lsy gq's Avatar
Senior Member

 
Join Date: Aug 2004
Location: Kensington Grove
Posts: 551
Thanks: 0
Thanked 28 Times in 18 Posts
Default

Quote:
Originally Posted by guyph_01 View Post
Cool this sounds interesting, So does it comes with the bolt holes drilled already? with bolts? Or is it cheaper without the above?
Are they the 1 3/4 inch seamless tube, and you said you can send them marked out?

Out of interest, do you do scrub bars too? what would and pair cost posted here?
All for a LWB GQ, 2", no body lift.

Thx
it comes with the bolt holes already done and bolts as well..

the $300 price is for 32nb tube..if you wanted the 1 3/4 seamless tube it would be an extra $135

scrub bars I can do depending on your front bar but I cant totally guarantee a perfect fit and freight would be fairly expensive..where is the freight to?

dave
__________________
Rock Sliders, Rear Bars, Front bars..hell any sort of fab work..i can do it
https://www.patrol4x4.com/forum/showthread.php?t=4758

pm or email [email protected] website www.bolsys.com.au
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #13  
Old 13-05-2014, 07:30 PM
patrolpez's Avatar
Senior Member
 
Join Date: Dec 2008
Location: melbourne
Posts: 148
Thanks: 1
Thanked 13 Times in 7 Posts
Default

I just finnished mine , and there great !

Everthing was perfectly cut and to the right sizes .
I made the main section up first and used jack stands and the misses to get the bars lined up to the chassis rail mounts , tacked and removed then welded all up, came up a treat !

I painted them with 3 coats of polyurethane paint ( satan black )

I can highly recommend these kits !!
__________________
2000 GU duel fuel,2 inch lift,MTZ'S,On board Air,winch,HID headlights
member 22 4.5 Club
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #14  
Old 13-05-2014, 08:19 PM
Sparkys's Avatar
Senior Member
 
Join Date: Oct 2011
Posts: 1,672
Thanks: 238
Thanked 536 Times in 335 Posts
Default

Do you do them to suit a 2" body lift?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #15  
Old 13-05-2014, 11:50 PM
80lsy gq's Avatar
Senior Member

 
Join Date: Aug 2004
Location: Kensington Grove
Posts: 551
Thanks: 0
Thanked 28 Times in 18 Posts
Default

Quote:
Originally Posted by Sparkys View Post
Do you do them to suit a 2" body lift?
yes I can...the front mount is slightly different and you can use the larger bolts on the GQ's as well..

dave
__________________
Rock Sliders, Rear Bars, Front bars..hell any sort of fab work..i can do it
https://www.patrol4x4.com/forum/showthread.php?t=4758

pm or email [email protected] website www.bolsys.com.au
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #16  
Old 14-05-2014, 01:06 PM
patrolpez's Avatar
Senior Member
 
Join Date: Dec 2008
Location: melbourne
Posts: 148
Thanks: 1
Thanked 13 Times in 7 Posts
Default

Here are some pictures of mine




__________________
2000 GU duel fuel,2 inch lift,MTZ'S,On board Air,winch,HID headlights
member 22 4.5 Club
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #17  
Old 14-05-2014, 01:10 PM
patrolpez's Avatar
Senior Member
 
Join Date: Dec 2008
Location: melbourne
Posts: 148
Thanks: 1
Thanked 13 Times in 7 Posts
Default

Then I held them in place to get all the angles right


Then a bit of red oxide and some black




and Vola rock sliders PS grip tape is very course lol
__________________
2000 GU duel fuel,2 inch lift,MTZ'S,On board Air,winch,HID headlights
member 22 4.5 Club
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #18  
Old 31-07-2014, 03:03 PM
Senior Member
 
Join Date: May 2010
Posts: 291
Thanks: 11
Thanked 23 Times in 19 Posts
Default

What wall thickness is the pipe used?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #19  
Old 31-07-2014, 09:23 PM
80lsy gq's Avatar
Senior Member

 
Join Date: Aug 2004
Location: Kensington Grove
Posts: 551
Thanks: 0
Thanked 28 Times in 18 Posts
Default

Quote:
Originally Posted by jtraf View Post
What wall thickness is the pipe used?
3.2mm
__________________
Rock Sliders, Rear Bars, Front bars..hell any sort of fab work..i can do it
https://www.patrol4x4.com/forum/showthread.php?t=4758

pm or email [email protected] website www.bolsys.com.au
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
  #20  
Old 11-08-2014, 12:38 PM
Senior Member
 
Join Date: Sep 2008
Location: Mandurah W.A
Posts: 110
Thanks: 11
Thanked 3 Times in 3 Posts
Default

Hey Dave, Are you able to do a kit for a 2000 GU ute? if so how much delivered to Mandurah W.A 6210?

Cheers
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On







Subscribe in NewsGator Online


All times are GMT +10. The time now is 12:59 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
 

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.