Patrol 4x4 - Nissan Patrol Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 20 Results
  1. New Members, Please Introduce Yourself Here
    Hey all, Adrian Here from 🇵🇦 Panamá, I just bought a GU patrol TD42 sitting on 33x12.5R15 great rig! Currently on Maxxis BigHorn MT’s switching to Falken Wildpeaks At3w to avoid some of the buzzing since this is my daily, thinking about a 2” lifts in a few days going with OME here locally it’s a...
  2. DIY Modifications & Accessories
    Hi All. I am looking for some help. I would like to build some rear drawers for my 2008 Patrol. Could anyone direct me to somewhere on this (or any other) site which has plans for them? Inspiration, tips & tricks or things you've done along the way that you'd add or change to the build. Bonus...
  3. DIY Modifications & Accessories
    So i have been flat out getting the ute setup for her maiden trip. I finally completed the drawers. Here are a few posts on how i did it. Hopefully it will withstand the upcoming test. :driving:
  4. DIY Modifications & Accessories
    I started work today on my slide out kitchen for the rear under canopy slots. On the ex-Telstra ute I imagined they were used for ladders or stuff like that. I decided to go with 25x25mm aluminium tube and plastic joiners. I found some tubing that has a lip about 6mm from the top edge which...
  5. DIY Modifications & Accessories
    The damn flapping sound form around the rear of the cab on my DX ute has been driving me mad!!! :anger: Today I took the cab rear vents off and cut up some old sponge to insert so they get held shut a bit better. I didn't stuff it too much, just enough to stop them flapping. Hopefully that will...
  6. Nissan Patrol GU/GR Y61
    Hi, Just started on my first mods to my newly purchased 2014 DX Patrol Ute - Ex-Telstra job. Actually first mod was this morning, but that came to a halt, ordered the wrong part - I think?? :withstup::anger...
  7. General Patrol Discussion
    Hi, I ordered some pollen cabin filters for my 2014 Patrol, DX Ute. BUT they don't seem to fit (see photos) :withstup::ranting:: Can anyone tell me part number for the correct ones? or even better a photo. I have also added a photo of what i think the they are meant to look like????? :cheers:
  8. Nissan Patrol GU/GR Y61
    Hi All, I purchased a 2007 Nissan Patrol (3.0L diesel) about 2 months ago with 112,000 kms and it drives great! I dont drive it much during the week, but on weekends we go for long drives, easy 4x4 type stuff, camping etc. I purchased the car from a dealer, and I can see the previous service...
  9. DIY Modifications & Accessories
    Hi there, I was planing to install an iPad into my Y62 2016 SE Type2 dash and since there was no experts near to me ( in Kuwait ) so i deiced to look for it in the internet, the goal is to install it with the lower modification required to reach the goal putting in consideration that i dont...
  10. General Patrol Discussion
    So Looking at Building a set of Rear Draws in my GU. That at any given time I can put down another piece with the rear seats folded to turn the contraption into a bed. Big question is but, Metal framing or Completely wood? Has anyone built a draw/bed combo? What'd you make it out of? This just...
  11. Auto Electrical
    I am putting new LED indicators in the bull bar of my 1999 GU. I chose a model with a seperate white light imbedded so I could wire it up to be permanently on with the ignition for safety. I plan to do the same on the rear, with red lights. I am after suggestions on how best to wire this up. Thanks
  12. DIY Modifications & Accessories
    Just thought I would share this. It is the start to my DIY snorkel. Thus far I have marked out where I need to cut the guard (inner and outer) and mocked up the snorkel. Now all that's left is to find a creative way to fit the 4" pipe on to the GQ rd28t standard air box.. With the air inlet at...
  13. General Patrol Discussion
    Like a lot of people I hate to spend money on tools if I can improvise or make it myself so I thought it would be interesting to see what other people have made. So what tool have you made? I will go first; I really hate adjusting the fuel screw in the pump, trying to get a socket in there...
  14. DIY Modifications & Accessories
    Here's my drawers. The frame is out of qubelok aluminium and the rest is 16mm mdf. It took 3 weekends to build working both days for around 5-6 hours so about 30-35hrs all up. Total cost was probably around $500-$600. Some advice for anyone thinking of doing their own, plan everything well. I...
  15. DIY Modifications & Accessories
    I needed some extra storage room in the ute and a place for the uhf so I decided I needed a roof console, I didnt like the look and price of the ones for sale so I made my own, I used mdf and glued and screwed it together then had it trimmed in grey vinyl so its easy to clean. I added two...
  16. DIY Modifications & Accessories
    Well today I was a little bored so I decided to knock up a table so we have somewhere to prepare food and drinks while in the great outdoors. I had some 3mm checkerplate left from my canopy build so I used that and some other leftover scrap I had lying around. I wanted it to be light and also I...
  17. Trips, Touring and Treks
    Hey guys, Just was hoping to get some tips on what u have found to have needed while traveling the most and any little mods that u could recommend would be great as I am planning to travel aus in August this year.
  18. Nissan Patrol MQ/MK 160/260 series
    Today I decided to start posting my drawer buildup, I have made a good start and had a few boo boos already but will post it as I get round to doing the drawings then I'll throw up the photos and notes. Below is a google sketchup representation of my original idea, the slide out bench under the...
1-18 of 20 Results
Top