On my 2016 GU Patrol Auto, the factory intercooler is leaking at the righthand top. Have read through the forum.
My mechanic recommended the Crosscountry intercooler Ultimate. Maybe I want to tow one day a caravan. Also, he stated that a VNT Boost Controller would help.
What would be your...
Have bought myself a boost gauge and tillix valve for my 2009 GUs4 zd30 CRD and am trying to find a good place to install the tap fittings to get boost readings. From my research from other people on the forums it sounds like you can either get an adaptor plate that goes underneath your MAP...
Hey guys, ive purchased a hpd series 2 intercooler kit and im not overly excited about the look of the bonnet scoop they provide… I love the look of the Colorado bonnet scoop but wondering if anyone has had any problems with the scoop fowling with the core since it’s so much bigger?
Yesterday I removed the intercooler pipe off the inlet side of my HT18, there was quite a bit of oil in the piping and also a bit sitting inside the turbo outlet.
Could this mean to turbo is about to S*&T it’s self or could there be another reason?
It doesn’t blow a heap of smoke while...
Am looking at blocking off my egr on my patrol, looking for the exact location where people have put the blanking plate?
and is it recommended if your installing an intercooler? As I will be installing a jonny tig intercooler.
I have a 02 Gu TD42T factory intercooled and I’m installing a cross country ultimate intercooler kit in and was wondering if anyone can tell me where the boost/vac line goes to as my stock on went to the back of the intercooler, I was supplied a Vac cap plate from CC so was wondering if it just...
Gday guys! First time poster here.
I have a 2004 Patrol with a ZD30. My day of success with her has just run out.
Iv replaced the battery and alternator today which went well.
After testing it out and going for a drive, I pulled off the big plastic cover from the intercooler and found two...
I'm pretty new to it, what is entailed with changing out the intercooler for a better one?
Is it as easy as taking off the cover, removing the hoses and bolts holding down the old intercooler, then reversing the process with the new one?
There aren't any oils or anything inside that...
got a 04 gu ute with a factory turbo td42, i’m looking at getting a front mount intercooler but don’t want to go through the hassle of fitting it (heard they are quite a pain) any recommendations for places to fit them in qld?
also recommendations on what brand of intercooler to run?
There doesn't seem to be any information on here about the PDI's, so I thought I'd share my thoughts and process on fitting mine.
I'm about halfway through fitting it, so this is still a WIP.
I had no illusions that fitting this cooler would be a straight forward bolt-in and job, however I was...
Hey lads new here!
I have a 99 gu patrol coil cab she's turbo non intercooled
My turbo is on the way out and my pump is ****ed as well, just want some knowledge from you lads as what you would suggest turbo and pump wise
I dont want crazy power would honestly be very happy with 150hp safely...
I'm looking for a way to run a boost gauge without having to drill into my intercooler. Is there any way. Spoke to a mechanic who suggested a T piece through this line but wanted to get opinions to be sure. If this won't work where else Can I put the T piece
After alot of searching I decided to bite the bullet and buy a HPD cooler for my rig.
The reason I'm posting is because I haven't seen a great deal recently posted about the intercooler themselves so I thought why not give an update from 2019.
Presentation was nice...
Ok, easy question that i would like some advice on.
So i can do one upgrade before my trip later in the year to Lake Eyre possibly across the Simpson with my 2014 GU Dx Ute.
Currently have OEM intercooler and OEM exhaust.
Which one should i upgrade before i go? I would like to
- Reduce EGTs
I am in the process of adding an intercooler to my factory turbo TD42t GU Patrol. The intake is the EGR integrated one, so the non-turbo adapters don't fit (see picture of similar engine layout, I have better pictures but can't figure out how to add them to this post).
I've been trying to do a bit of research on this topic for a while as I'm looking at getting an intercooler for my rig.
From reading some threads I have seen that Cross Country Intercoolers or HPD seem to be the go too intercoolers for the patrols.
But what is the advantage to...
After 3 years of listening to the IC on my ZD30 whistle/whine, I'm thinking of replacing it. This is catalysed by a trip to Mr Nissan where a preliminary drive suggested that some of the issues I'm having elsewhere with the car may be linked to the IC leak getting worse...
So I have just replaced the third motor on my intercooler fan.
First one was a Spal fan, two years and I replaced the motor with a Davies Craig, then a Repco branded version, which I just replaced again yesterday.
It seems that these thermo fan motors are only designed to be mounted upright...