Been having some fairly perplexing issues electrically, hoping someone has experienced similar issues and found the solution/has advice.
First was the lights on warning chime and key in ignition buzzer stopped working.
Seatbelt on sensor seems to have gone too.
Next up was the...
Thought I'd share what I'm dealing with this weekend.
I'm installing a new headunit, speakers, small form factor subwoofer and amplifier, as well as full sound deadening etc over the next few weekends. I thought I'd tackle the headunit wiring first as I had some errands to run in the...
Hey guys, bit of an electrical noob here. Just bought a new head unit for my 07 GU 3.0 ST and the harness that I bought for it (made for Nissans and is applicable for Patrols) only has two connections. These connect with the two center plugs. Just wondering what the third down the bottom is for...
Would someone be able to tell me what this does and is needed for want to tidy up my battery wiring and this takes up heaps of room and looks to be rigged up roughly from previous owner, on a tb42 carby
I know a few might have already asked but is there anywhere to find the correct wiring diagram for a GU patrol that won’t bugger around with the sub tank?
Had the problem years ago when auto elec wired my ute wrong and had to disconnect the battery every time I needed to use the sub...
Hey people I'm building out an electrical box, and need a very basic but essential question answered.
Essentially just an enclosure with a 12x fuse holder, and 2x busbars for negative returns and a few relays.
I want to set the thing up for future expansion, so when I want to install something...
I'm in the process of fixing up some wiring in my GU (2002 ZD30) as I've been having some battery issues.
The main battery terminals are very corroded. Also, the previous owner installed a dual battery setup which isn't wired very well. I'm going to redo the dual battery wiring, but I...
Hey guys, been a while since I’ve posted on here!
In a way I guess it’s a good thing because I havnt been stumped with any issues but I’ve stumbled across one that is a bit frustrating for me and I know a few others are having similar issues!
So I have just completed an ls1 conversion into my...
OK guys, I'm shortly setting up a new fuse/relay box layout and likely using the Busmann modules. So given they have the option of positive bussing on either the fuse or relay side (or both) I'm debating the merits of bussing the fuses or bussing the relays.
As I see it bussing the fuse means...
I am putting new LED indicators in the bull bar of my 1999 GU. I chose a model with a seperate white light imbedded so I could wire it up to be permanently on with the ignition for safety. I plan to do the same on the rear, with red lights.
I am after suggestions on how best to wire this up.
Hi guys just wondering whether anyone can help with the sub tank light staying on and switch not working. I have read a few threads with regards to disconnecting the battery for an hour and disconnecting the plug on the module. None of these have worked. The light has only recently come on and...
I have a TI 2008 manual.. it has a sensor wire that I believe needs to be connected up.. but for the life of me I cannot find where.. sorry.. I know that is pretty sad.
Anyway.. will post up a pic in 5 minutes.. but essentially it is a 2 pin white plastic plug (with black external) that...
Hey all i recently just pulled out my old stereo and installed an Alpine IVE-W530 Double din headunit and thought i would post the wiring diagram i figured out incase it helps someone else out.
FL Speaker + = Blue
FL Speaker - = Black with white stripe
FR Speaker + = Brown
FR Speaker - = Black...
Im going to get a winch hopefully at this weekends Perth 4wd show.
I've done some research and would like to isolate the winch. I would like to isolate one of the control wires rather than the main RED Positive wire as the amp draw can get upto 400amps.
It'll be easier to isolate a...
Can't seem to find any info on this using the search, so can anyone helpI have an 07 GU patrol 3.0L
Boost and egt are mounted on A pillar.
Both gauges are Autometer Cobalt electrical with white red and black wires
I have got a constant 12 volt sorted but am having trouble with the other 2wires...
Hi everyone I'm having some wiring issues. I have no dash lights or tail lights. I have checked all fuses and everything seems to be fine. I have brake, reverse and indicator lights. Are there any common spots where wires break in a 4.2 diesel ute?
I thought I'd share a less than amusing story with you all, and maybe see if anyone has some advice on the best method to fix up.
GU II, 2000, 3.0TD, 35L Sub tank (factory fitted)
We got back from Fraser Island yesterday - whilst on the island the tracks were quite a bit softer than usual in a...
I've created my first thread, I find a lot of great info on this forum, but found a hole!
I've bought and installed working tail lights for my 2012 GU8, they're the Middle Eastern spec Depo brand ones with the indicator at the top. I've carried the earth and reverse light over from...