Patrol 4x4 - Nissan Patrol Forum banner

2.8 crank shaft sprocket problem

1479 Views 10 Replies 4 Participants Last post by  MadGrunt
trying to replace the front main oil seal on the 2.8.
i have got everything off but the crank shaft timing sprocket, knocked the key out of the key way but the sprocket does not budge.

Anyone done it before. advice on getting the bugger off would be great as the manual doesn't say S#$T about it.

1 - 1 of 11 Posts
Good luck mate, you'll be right.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.