5" lift 98 gu
1 - 2 of 2 Posts
Joined
·
163 Posts
Cant get it done in QLD. Maximum 2" sus lift and 15mm above standard tyres (although i do believe that 32"s on a patrol are now legal).
You can just run the risk, or be legal. But definitly not in regards to engineering.
You can just run the risk, or be legal. But definitly not in regards to engineering.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Lower control arm
Suspension and SteeringDoes aftermarket lowers straight? Cause original one on my swb are not.. Chassis mounting are larger than differential mounting cheers!- 6
- 89
-
Slowman65 · updated
-
Manual hubs, very stiff
Suspension and SteeringMy drivers side manual hub has become very very stiff to turn from free to lock. Is this likely just needs taken apart and given some grease? Perhaps a few too many water crossings? Is it just coincidence that the swivel hub has been leaking?- 2
- 67
-
Spring rate help
Suspension and SteeringHas anyone had any success with getting a coil cab Ute to ride nice empty most of the time. Rear is oversprung Robinson's don't want to know about it even though they recommended the last ones. So lost faith in them and would like to buy a different brand. Got a steel tipper tray with 50l...- 27
- 1K
-
Superior engineering springs?
Suspension and SteeringHey guys Noticed that superior are doing there own springs.. I know Greg proberly has abit to do with there development so I'm not going too question are they any good but more there spring rates, and rebound Who's using them? Any thoughts out there on them? At $120ea there priced very well...- 369
- 56K
-
GASSED GU · updated
-
Lifting a late model Y61
Suspension and SteeringCan someone with a later model Patrol, those with traction control, that have lifted there Patrol,3 or 4 inches, give me some feed back? Is it possible?, how does the traction control behave after the lift? Any other problems? Thanks.- 10
- 419
Join now to ask and comment!