Patrol 4x4 - Nissan Patrol Forum banner

1 - 8 of 8 Posts

·
Registered
nissan patrol
Joined
·
106 Posts
Discussion Starter #1
Another panhard question, so my mechanic had the arm/rod off the otherday to replace the pan hard bushes that i supplied but we found that the Larger end ( GU DX ute Series 2 ) has an internal diameter of 32mm and every bush i can find online to replace it for my ute/series is 26mm internal diameter? Has anyone come across this? D:
 

·
Registered
nissan patrol
Joined
·
1,397 Posts
Series 1 had a different end to 2,3
 

·
Registered
nissan
Joined
·
2,091 Posts
All Patrols should use the same bush at the diff end (big end), I can't recall what the diameter is, but I reckon it is 32mm coz 26mm sounds a bit small.

I'm only going by memory though.
 

·
Currently in PAD rehab
Joined
·
18,407 Posts
I took some pics in my panhard diy but I dunno if the wagon is the same?
 

·
Registered
Joined
·
9,512 Posts
Have a look here.
Which bush is it, at the diff end or at the chassis end?

The diff end bush is bigger inside diameter but smaller outer.
http://www.superiorengineering.com.au/store.php?cPath=31_32_34_285

http://www.roadrunneroffroad.com.au...sis-end-GQ-Patrol-5513501J10-55135-01J01.html

The chassis end has a much bigger outer diameter but smaller inside hole through the middle. These chassis end bushes changed about 2002 03 from an all rubber bush to a spherical ball joint with a rubber cover.


http://www.roadrunneroffroad.com.au/Panhard-bush-Rubber-Chassis-end-GU-Patrol-Y61.html
 
1 - 8 of 8 Posts
Top