Auxiliary switch LED too bright. Can I dim it?
OK electrical gurus.
I have recently installed a manual isolation switch in my dash so I can totally isolate the duel battery by switching the solenoid off.
The switch I used has an LED indicator which is very bright even during the day.
Can I install a resistor or something on the earth wire that I have grounded for the switch LED to reduce the voltage flow and therefore the LED brightness?
I would like to about halve the brightness so if a resistor would work what rating should I use?
If a resistor is not an option is there any other simple way to do it?
Cheers.
I have recently installed a manual isolation switch in my dash so I can totally isolate the duel battery by switching the solenoid off.
The switch I used has an LED indicator which is very bright even during the day.
Can I install a resistor or something on the earth wire that I have grounded for the switch LED to reduce the voltage flow and therefore the LED brightness?
I would like to about halve the brightness so if a resistor would work what rating should I use?
If a resistor is not an option is there any other simple way to do it?
Cheers.
1 - 1 of 3 Posts
1 - 1 of 3 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Patrol 4x4 - Nissan Patrol Forum
Patrol 4x4 is the best Nissan Patrol forum to discuss the SUV’s specs, parts, accessories, reviews, problems and more. Join now!
Full Forum Listing
Recommended Communities
