[ONAROLL]

I know this subject has been discussed before however I'm after any suggestions for retail outlets in western Sydney who specialise in exhaust upgrades for 4WDs. I am considering an upgrade to my 2001 GU Patrol to a 2.75 or 3.0 inch exhaust system as a preliminary step before also installing a DP chip when dollars permit. Can anyone recommend a business who knows what they are doing so I can discuss my plans and arrange for a new exhaust. Also if someone has done a similar upgrade I would welcome any advice as I'm uncertain what is best, 2.75 inch or 3.0 inch.

Regards

ONAROLL

 

[Bsben]

i am about to put a 3 inch redbak (off the shelf) on my 3 litre on thrusday ($990 installed) then a Roo Systems chip, will let you know thoughs once done

 

[ONAROLL]

That would be great to hear of your experience as I'm just starting out looking into this and would like to do something in the new year.

 

[the big rig]

Hi tech 4x4 in penrith can do a 3inch exhaust for 950 I think was the price I got quoted

 

[eddiep123]

try scotts rods custom exhausts herd there pretty good

 

[Nikolay]

hello
you in Australia if you remove the silencer and catalyst, you can pass inspection checkup ?

 

[camp road]

do sum research buddy and get some quotes very competive market if try harder enough youl get supply fit mandrel bend with dump under 1000 bucks

cheers

 

[Chaz]

hello
you in Australia if you remove the silencer and catalyst, you can pass inspection checkup ?

Hi Nikolay,

It’s ok to remove the silencer because the sound is checked at the tailpipe with a gauge and provided it isn’t too loud, it should pass. We are not able to remove the catalyst legally, but many do and not all have to pass regular inspections. If we get caught without a cat, it can be expensive. It’s best to fit a high flow 100 or 200cpsi cat or make it easily removable as I have done.

 

[craggitt]

NISSAN PATROL 3.0L Y61 GU 3" EXHAUST incl HIGH FLOW CAT (eBay item 110570696934 end time 06-Dec-10 20:22:36 AEDST) : Cars, Bikes, Boats

Try this

 

[ONAROLL]

Thanks for the tips everyone, I will check out your suggestions, probably will not decide until after Xmas but need all the advice I can get.....Thanks

Onaroll

 

[GU03_foz]

Has anyone got the Roo systems package with chip and there exhaust cos i am thing of getting one of those next year.

 

[Troys 5.7 GU]

I got one there's priced up and it was very expensive. Can't remember the price but I nearly choked.

 

[Nikolay]

Hi Nikolay,

It’s ok to remove the silencer because the sound is checked at the tailpipe with a gauge and provided it isn’t too loud, it should pass. We are not able to remove the catalyst legally, but many do and not all have to pass regular inspections. If we get caught without a cat, it can be expensive. It’s best to fit a high flow 100 or 200cpsi cat or make it easily removable as I have done.

Hi Chaz
I understand you
we do not have such a severe inspection and I removed and the catalyst and muffler

 

[itsgarry]

Has anyone got the Roo systems package with chip and there exhaust cos i am thing of getting one of those next year.

Just put a deposit on one, (on layby sort of), will pay a bit more December and get it in January. They are very good people to deal with. So far they have sold around 240 systems for the 3.0L Patrol.

Comes with 3" stainless exhaust, and they will weld in a fitting for the EGT sensor.

Once it get it, I will let you know how it goes.

--Garry.

 

[SHANE 3.0]

The Roo system for 3" mandrel bends ranged from 1300- 1600 for SSteel.
Thee chip was $1800

 

[bennoGU28]

I wouldnt even have a crap in thier toilet.

 

[itsgarry]

The Roo system for 3" mandrel bends ranged from 1300- 1600 for SSteel.
Thee chip was $1800

Combined 3" stainless exhaust and chip is less than $3000 delivered. Aluminized steel is about $300 cheaper.

If you mention the forum you might get another 10% off as per http://www.patrol4x4.com/forum/408839-post10.html (I did not see that post until after I ordered, so have just sent them an email asking for a discount)

--Garry.

 

[GU03_foz]

Just put a deposit on one, (on layby sort of), will pay a bit more December and get it in January. They are very good people to deal with. So far they have sold around 240 systems for the 3.0L Patrol.

Comes with 3" stainless exhaust, and they will weld in a fitting for the EGT sensor.

Once it get it, I will let you know how it goes.

--Garry.

Cheers mate that would be good like to know how it goesunkrock:

 

[VK4CZ]

Not sure about these compared to the s/stell and aluminized options, but the price looks good!

speedyexhaustandtowbar