Patrol 4x4 - Nissan Patrol Forum banner

fitting boost gauge, where to connect to?

4599 Views 6 Replies 4 Participants Last post by  Ashleyb
Hey guys,

im gonna fit my pillar pod and gauges this weekend but i dont know where to connect into for the boost.
my truck is a 2004 st patrol 4.2l turbo intercooled. does anyone have a photo of where to connect to?

1 - 1 of 7 Posts
b18c is that for a 3l or are you running a dawes and needle valve on a 4.2? really for boost gauge all id do is put a t piece between the 2 ends of the hose that goes to the turbo actuater. if its like my cousins turbo which is should be then the hose just runs from boost side of turbo to acutater. hose is about 3" long. and almost dead straight. hope this helps
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.