Patrol 4x4 - Nissan Patrol Forum banner

1 - 5 of 5 Posts

·
Registered
nissan patrol
Joined
·
32 Posts
Discussion Starter #1
I've just picked up my egt and boost gauges.
I need help on getting my hose and power from sensors etc to my gauges on my dash?
How everyone done there's?
Thanks in advance
 

·
Rogue
nissan gu patrol
Joined
·
20,220 Posts
What?

I ran a hose from a ferrule I welded to my steel intake pipe at the intercooler through the firewall bung under the brake booster, then up to the pillar. I ran the EGT probe wire from a ferrule I welded to the turbo dump pipe through the same bung and into the pillar pod. Ignition 12V power supply and headlight 12V come from radio head unit loom.
 

·
Registered
nissan patrol
Joined
·
32 Posts
Discussion Starter #3
What?

I ran a hose from a ferrule I welded to my steel intake pipe at the intercooler through the firewall bung under the brake booster, then up to the pillar. I ran the EGT probe wire from a ferrule I welded to the turbo dump pipe through the same bung and into the pillar pod. Ignition 12V power supply and headlight 12V come from radio head unit loom.
What's with the what?
It was a simple question as I didn't know how to. That's why I asked
 

·
Rogue
nissan gu patrol
Joined
·
20,220 Posts
The wording of your question confused me. (eg. "power from sensors").
 

·
Registered
nissan patrol
Joined
·
32 Posts
Discussion Starter #5
Well my bad..
 
1 - 5 of 5 Posts
Top