GQ (intercooler)
Join the discussion
Recommended Reading
-
Intercooler fitting gq td42
Nissan Patrol GQ/Y60 & Ford MaverickHey guys in the process of fitting up my front mount intercooler , iv just replaced all my a/c components so the condensor is staying , what iv found trying to fit a. 450x300x76 cooler in with the condensor fan is that the intercooler wont fit . now, i have a idea if i move the condensor...- 3
- 98
-
TD42T boost control
Nissan Patrol GQ/Y60 & Ford MaverickHey all, after a big search through the forum I've decided to try upping the boost a little on my motor. The GFB Atomic boost controller has arrived today, I ordered that after seeing it being recommended by DieselTuner on here. My goal is to have slighty more response and to lower the EGT's...- 6
- 93
-
Fitting aftermarket cruise control - accelerator cable linkage?
Nissan Patrol GQ/Y60 & Ford MaverickHi All, I'm fitting an AP500 kit to my '90 GQ TD42 manual. Very similar actuator linkage to AP60 (vacuum) or AP300 My throttle cable only travels 27mm from idle to the wide open stop around that quarter arc and the spec requires at least 48mm and up to 55mm :-( How did people fit the...- 13
- 283
-
Front brake caliper bolts.
Nissan Patrol GQ/Y60 & Ford MaverickSo, driving home from work the other day and I notice a new vibration/sound... Quite faint but definitely new...and it appears to come on when pushing the brake pedal, so pull over and have a look. Luckily, there is a little bit of grease (from swivel hubs) coating the inside of my rims and I...- 10
- 591
-
STIC · updated
-
Pistons
Nissan Patrol GQ/Y60 & Ford MaverickHave a 1997 GQ TD42 with after market turbo mild boost..14 psi.Always serviced. Has piston picked up in no6 cylinder. Question...Will turbo pistons fit??? Are finished liners the way to go.??Can i or should i fit additional oil squirters??The rest of the pistons and bores are ok. Trying to do...- 5
- 205
Join now to ask and comment!