[Mick..]

I want to remove my yellow parker globes and replace them with an white led. When I pulled the parker out I noticed that it has a tail light/brake light globe in it and on both sides. Is this factory or has someone been tampering?

It's a 1998 4.5 by the way.

Cheers Mick.

 

[Dirt Devil]

Factory, I took globe out and put leds in. works well.

cheers.

 

[Mick..]

Factory, I took globe out and put leds in. works well.

cheers.

Where did you get your leds from? I've looked at Jaycar, Super Cheap etc and no luck.

Cheers Mick.

 

[mickyd555]

have you never noticed the extra light when you indicate? the "brake" part of your parker light comes on when you indicate while the parker lights are on.

its pretty handy and i wouldnt go without it.

 

[Dirt Devil]

I made my own setup, I used 6x5mm white led's and wired them in 2 groups.

cheers.

 

[4.2BeautUte]

Yes it's a turning light in brake mode and park light it park mode.

I replaced mine with LED's, I can't remember the mob I bought them off but I found the link on this site by just searching around. They are an odd size wedge bulb and I had trouble finding them anywhere too.

I also replaced my front indicators while I was at it.

 

[Mick..]

Thanks for your help fellas.

Cheers Mick.

 

[1TuffGU]

Hi do you know what size wedge globe they are? Cheers

Yes it's a turning light in brake mode and park light it park mode.

I replaced mine with LED's, I can't remember the mob I bought them off but I found the link on this site by just searching around. They are an odd size wedge bulb and I had trouble finding them anywhere too.

I also replaced my front indicators while I was at it.

 

[JET-6]

I stock them Mick