Patrol 4x4 - Nissan Patrol Forum banner

Homemade roof console GQ

6840 Views 12 Replies 5 Participants Last post by  truck
here is my roof console it took me 2 days to put together only problem I am having is trying to wire it up. I might go down the drivers side floor pan and follow up the rear pillar.

Vehicle Car Auto part Automotive exterior

Vehicle Car Windshield Vehicle door Automotive exterior

Vehicle Car Family car

yes i did sand it back
Table Furniture Countertop Room

Table Furniture Bumper Wood

i have also added some netting across the top of each side

will post more pic when finished wiring
i made the width 250mm so it does not touch the sun virsors :p
See less See more
1 - 2 of 13 Posts
Where did you get the netting from?

Thanks mate, thats a very good job.
I have just bought myself an industrial sewing machine with walking foot, so I am going to be able to do my own stuff now. After a few lessons that is.

1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.