Patrol 4x4 - Nissan Patrol Forum banner

HT18 oil feed line, restrictor ?

2K views 2 replies 2 participants last post by  Marti 
#1 ·
im plumbing up my ht18 on my td42, I need to know if there is a oil restrictor on the 2 bolt plate that sits ontop of the turbo to feed oil to it.

im reading that sometimes a 1-2mm restrictor is in place but others say its not needed, just bolt a flange up with an 8 or 10 an fitting and its fine

what do you guys think?

I will be running the oil feed from between the engine mount which is a 1/8 fitting
 
#2 ·
Ht18 don't have an oil restrictor, only ball bearing turbos need this with high oil pressure. Just hook the lines up full flow.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top