Mk center to GU?
1 - 5 of 5 Posts
thats a big NO
on another note, where are you located????? I need a diff lock or 2
on another note, where are you located????? I need a diff lock or 2
no not at all.
want to sell them???
want to sell them???
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
EFR7163 turbo
Engine & DrivetrainThis thread is linked to the EFR 6758 info but since I was interested in sharing data specific to the mixed flow twin spool turbine in the 7163, and the fact that the other thread is nearing 70 pages, I thought I would start a new one. The upgrade is nearing completion with just some plumbing to...- 40
- 2K
-
edrooney · updated
-
Transfer case differences.
Engine & DrivetrainI have done some digging on here, and most info says that all the transfer cases are the same, except for the 4.8 which does not have the handbrake fitted. But, apparently the handbrake assembly will bolt on to that case. One of our old members, Jamie4800 posted some info on this a while back...- 2
- 40
-
GQshayne · updated
-
Td42ti pump onto silvertop with hobbs
Engine & DrivetrainG'day everyone A ti pump has come up for sale close to me and the bloke was running it on a silvertop with a hobb switch off the intake manifold to control the timing. I'm just wondering if the timing needs to be a more high tec or is it as simple as on off? If it is controlled by varrying...- 1
- 69
-
Millhouse88 · updated
-
RD28 ARP head studs
Engine & DrivetrainI thought I would post this up for those running more than standard boost on the RD28. Higher boost will cause the head to lift and blow the head gasket. ARP studs mitigate this. Part numbers as follows: AR300-8337 - nuts AR200-8537 - washers AU5.225-1B - studs Torque 3 stages 40,60,80 ft-lb...- 1
- 39
-
brianwood · updated
-
RE4 Torque Converter lockup disk size
Engine & DrivetrainI thought that Re4's TC lockup mechanism is very small even i have never seen a real one. But today I have searched youtube about some TC lockup info. And i found this specific TC has a much bigger TC lock up mechanism, it has a lockup friction lining same size as the diameter of the TC. see the...- 0
- 40
-
patrol97 · updated
Join now to ask and comment!