Patrol 4x4 - Nissan Patrol Forum banner

1 - 6 of 6 Posts

·
Registered
nissan
Joined
·
494 Posts
Discussion Starter #1
Hello,

I was wondering if anyone in the know would be able to source the part number for the factory pintle on the newer Y61 nissan patrols.

 

·
Registered
nissan
Joined
·
138 Posts
I do not know the genuine Nissan factory accessory part number for the pintle hook.

The bolt pattern should be 44.5mm x 85.7mm with a 12.7mm bolt hole x4.

This is a generic mount pattern size for many aftermarket pintle hooks and here in Australia you can source then from any truck and trailer parts supplier for about AUD $ 140.00

This is a 4,500kg tow load, 909kg vertical load and 50mm eye model I'm quoting.
 

·
Registered
nissan
Joined
·
494 Posts
Discussion Starter #3
The issue is that with GU2 patrols the lower hook extends too far down and fowls on the rear aluminum bumper step. This genuine Nissan one has a flat bottom, i would ask my local Nissan but here in Canada they would have no clue as the patrol/safari is not a locally offered vehicle.

I thought someone in AUS might have better luck or even access to Nissan FAST parts database.

It is a newly introduced 2015 part for 2015 Y61 Patrols in places like UAE, Saudi Arabia, Giana, etc...

pretty much if you google any 2015 y61 Patrol sales brochure its listed as an optional part, just no listed part number.

if you look closely at the picture above you can make out N01026 which seems like the last bit of a Nissan part code
 

·
Registered
nissan
Joined
·
2,057 Posts

·
Registered
nissan
Joined
·
494 Posts
Discussion Starter #5
Thats, It!!!


you are the best Kuro!

Thank you so much
 

·
Registered
nissan
Joined
·
494 Posts
Discussion Starter #6
I found and ordered one, will take pics once mounted
 
  • Like
Reactions: y60kuro
1 - 6 of 6 Posts
Top