My Nissan as above has blown a piston. We are trying to repair it with the engine in. Is this possible? Answers appreciated.
Nissan Patrol GR 3 ltr DI Can the sump be removed without taking the engine out.
Join the discussion
Recommended Reading
-
So I have to remove my engine... What should I do to it while it's out?
Nissan Patrol GU/GR Y61Long story short... I had a slow leak of coolant from the gasket behind the front engine housing. Over three days of work, it has become apparent that the engine will have to be removed to complete this job properly. (Thanks to the designer who decided the housing cant come off without the sump...- 11
- 253
-
What diff to run, 2.8
Nissan Patrol GU/GR Y61Hi, I have a 2000 2.8lt, what is a better diff to run, the current is revving high.- 2
- 38
-
racebred engine mounts on a 4.8
Nissan Patrol GU/GR Y61i keep destroying engine mounts on my 4.8 slug i was looking into replacing both mounts woth racebred as i have been destroying both sides but ive read that they create vibrations through the car. anyone with some info on how bad the vibrations are? Sent from my SM-G950F using Tapatalk- 6
- 130
-
CrazyTrolling · updated
-
Adding 5 Led lights
Nissan Patrol GU/GR Y61Hi folks. I do a lot of wiring here and there, but circuit's confuse me! I have 5 x 48watt led lights mounted, bought the cables to make a loom, got the connectors ect. I now need to buy relay(s). I read here and there that for this setup it's best to use 2 relays? Thing is. I don't have...- 23
- 288
-
Chipfryer · updated
-
GU series1 Transmission issue but works fine in cruise control
Nissan Patrol GU/GR Y61Hi Hope you are all well? I’m wondering if anyone has had a similar issue that I seem to be experiencing with my 1998 series 1 GU patrol LPG/PETROL automatic transmission. The issue I’m having is that when I go up a hill the car will begin to slow down and then it will change gear and hit...- 1
- 53
Join now to ask and comment!