Patrol 4x4 - Nissan Patrol Forum banner

Nokia Blue Tooth Car Kit Install GU

1726 Views 5 Replies 4 Participants Last post by  Pen
Ok I have pulled out a Nokia Bluetooth car kit from my old car and I want to install it in the GU. In the Commodore it muted the radio during calls. Does anyone know if this is possible on the standard GU double DIN (Model PP-2371H)? It doesn’t have a mute function on the front panel so I am thinking not but figured I would ask anyway in case of a work around.

If a mute function is not possible then which wire should I connect to what?

The Car kit has 4 wires as follows
Black – earth
Red – 12v+ (2amp fuse)
Yellow – CRM
Blue – IGNS (1amp fuse)

The wires out of the GU CD double DIN are as follows
Yellow – 12v + Memory
Black w white stripe – AMP ground
Grey w white stripe – AMP turn ON
Bluey grey – PWR Ant +
Orange black stripe – ground dimmer
Orange - ???
Black – Ground
Red – 12V power +
The rest are for speakers.

The radio also has 2 additional pin plugs (16 pins & 12 pins in each) that are not used.

Any help would be appreciated.
See less See more
1 - 2 of 6 Posts
Hey Wassup,
I had similar issues with the Nokia CK-7W but found it was the phone setting that displayed the suburb you were in. Every time it changed the suburb it cut the radio out. Anyway turned that function off and in worked fine.

I can't find my dam multimeter and was hoping someone help with the wire setup. If not I will get a multimeter tomorrow and nut it out.

1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.