Patrol 4x4 - Nissan Patrol Forum banner
1 - 2 of 2 Posts

·
Registered
Was known as JT54_Y61 GU IV 08CRD Wag ST
Joined
·
1,764 Posts
Check any exhaust support brackets that bolt to the eng block, g/box or rear eng mount side brkt. I had a right angle brkt break at the bend that was welded (SS) to the top of exhaust pipe just fwd of flex joint and was secured to a rear eng mount (g/box) side brkt. Welded it up and added an angle gusset. Still good.
 
1 - 2 of 2 Posts
Top