Patrol 4x4 - Nissan Patrol Forum banner

1 - 2 of 2 Posts

·
Registered
nissan
Joined
·
4 Posts
Discussion Starter #1
Hi,

I am Peder from Sweden. I am about to replace my 2,8 TD Patrol engine, in my -99 Y61, with a Landcruiser 4,2 TD engine.

To do that I need also to replace the FS5R50A gearbox connected to the 2,8 liter engine with the FS5R50B, used with the ZD30 and 4,2L Patrol engine.

I have already bought a FS5R50B gearbox. The trouble is that the "new" gearbox didn't come with a gear lever.

My question is if I can use the gear lever from the FS5R50A? That is to say - is it the same type of connections between stick and gearbox?

I have already left car, LC engine and gearbox in Poland (!) for the engine replacement so I can't check it myself.

The polish guys says that they don't match, but I don't think they have tried it yet. We have some language issues and I am not really sure that we understand eachother here.

As far as I can see online they should be the same (?):

EUROPE EPCDATA

2,8 Liter engine (gearbox FS5R50A)
341 - TRANSMISSION CONTROL & LINKAGE на Patrol Y61 Nissan Patrol - Автозапчасти

3,0 Liter engine (gearbox FS5R50B)
341 - TRANSMISSION CONTROL & LINKAGE на Patrol Y61 Ниссан Patrol - Автозапчасти


PARTSOUG

2,8 Liter engine (gearbox FS5R50A)
https://partsouq.com/en/catalog/[email protected][email protected]&vid=38557&cid=3&uid=129155

3,0 Liter engine (gearbox FS5R50B)
https://partsouq.com/en/catalog/[email protected][email protected]&vid=38853&cid=3&uid=129154


Any input would be much appreciated,

/Peder
 

·
Registered
nissan
Joined
·
206 Posts
Hi peder, welcome to the forum, if you want better response I suggest you try again with a different header, I mean " same" doesn't tell you anything really.
Good luck!
 
1 - 2 of 2 Posts
Top