Patrol 4x4 - Nissan Patrol Forum banner

Testing vac pump?

1181 Views 1 Reply 1 Participant Last post by  gmogger
Can anyone tell me what the vacuum pump output should be from a 1994 td42?
1 - 2 of 2 Posts
Found it;

Inspection (Cont'd)
1. Install vacuum gauge.
2. Run engine at 1,000 rpm or more.
3. Check vacuum.
Specified vacuum:
93.3 kPa (933 mbar, 700 mmHg, 27.56 inHg) or more
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.