i have a T3/T4 turbo or known as T04E. it has AR .50 on the boost side and AR .63 on exhaust side.
i need to know if this will work on a TD42, i have a mate that said it will work but i just want to make sure before i start or i will look for another turbo?
any help would be great.
cheers
Hi All,
I'm fitting an AP500 kit to my '90 GQ TD42 manual.
Very similar actuator linkage to AP60 (vacuum) or AP300
My throttle cable only travels 27mm from idle to the wide open stop around that quarter arc and the spec requires at least 48mm and up to 55mm :-(
How did people fit the...
So, driving home from work the other day and I notice a new vibration/sound...
Quite faint but definitely new...and it appears to come on when pushing the brake pedal, so pull over and have a look.
Luckily, there is a little bit of grease (from swivel hubs) coating the inside of my rims and I...
Have a 1997 GQ TD42 with after market turbo mild boost..14 psi.Always serviced. Has piston picked up in no6 cylinder.
Question...Will turbo pistons fit??? Are finished liners the way to go.??Can i or should i fit additional oil squirters??The rest of the pistons and bores are ok. Trying to do...
Gday Guys,
just converting the Petty GQ over to Diesel Auto,
Was TB42 efi Auto.
Got everything in and running, Just this TPS match up,
anyone have GQ TPS from tb42 (original petty loom) to the TD42 Tps wiring Colours handy?
Cheers
