GQ bumper mount bolt dimensions?

mr_mike · Jun 16, 2011

I know this is a long shot but by any does chance anyone have the bolt hole orientation/dimensions for a GQ bumper or bullbar where it mounts to the chassis?

Planning on making a tube bar soon and if anyone has these measurements on hand would save me a heap of time and work as i would have to strip spoties, UHF antenna as well as the bullbar all for 5min of measuring.

cheers mike

Mick73 · Jul 16, 2011

This may help you out.

offroad division · Jul 17, 2011

for the driver side there are already fixed nuts.

They are 14mm fine thread. I use 14mm coarse for the other side with nuts and spring washers.

The coarse bolts are about half the price of the fine you see.

To get the nuts on the back, grab a 7/8 or 22mm spanner, put masking tape over the back and the nut will 'stick' to the spanner while you poke it into the chassis rail and get the bolt started. Hope that makes sense.

GQ bumper mount bolt dimensions?

Attachments

Our Vendors

Top Contributors this Month

Recommended Communities